zinc nickel barrel plating

Zinc Plating, Zinc Nickel Plating and Tin Zinc Plating Specialists

AVOID LOSING CUSTOMERS!

Not all plating services are the same....

Learn how to select the one that's right for you!

 

    Wolverine Plating Corporation offers barrel zinc plating and barrel zinc nickel plating services to a variety of Industries.

    • Corrosion resistance
    • Abrasion resistance
    • Wear resistance
    • Improved lubricity
    • Non-Toxicity and biocompatibility
    • Light reflection and absorption
    • Electrical insulation.conductivity
    • Solderability
    • Enhancements of paint adhesion
    • Building up of thickness on undersized parts
    • Aesthetic / Decorative Qualties

 

PROCESS PERFORMANCE STATISTICS

Learn more about why our Zinc (Zn) or Zinc-Nickel (ZnNi) coating could be right for your application.

 

 

 

 

 

 

Barrel Plating vs. Rack Plating

Barrel plating is generally seen as a way to achieve mass production finishing at a low per part cost.  And while barrel plating can be somewhat limited by size of parts that can be coated, a wide variety of shapes and sizes can be readily and effectively handled by barrel plating.

Typically, if you have a large number of non-oversized metal parts that need to be electroplated, barrel plating is your most cost effective choice.

Need to talk to someone about YOUR electroplating needs?  Or would like for us to recommend a rack plating company? Contact Us

But What Alloy is Best to use to Coat my Metal Part?

Recently, a Salt Spray Test was run by a NVLAP certified laboratory, testing the overall effectiveness of zinc-nickel, zinc-cobalt, and zinc-iron against corrosion.  Each coating was tested in a salt spray chamber, and then the number of hours until red rust appeared was determined.

The test showed that it took almost twice as long for the zinc-nickel coated part to rust, as it did for the zinc-cobalt and zinc-iron plated part. This result indicates than when resistance to corrosion is important, zinc-nickel is the coating of choice. Zinc Alloy Salt Spray Test Results

 

Should My Part Be Coated with Zinc or Zinc-Nickel?

Depending upon the application for which the part will be used, it may be better to apply a zinc-nickel coating than a zinc coating.  With other parts and applications, a zinc coating is sufficient.

To learn more about the advantages of zinc-nickel over zinc coatings, Barrel Zinc Plating Zinc-Nickel Plating

SITE MAP | PRIVACY | SITE CREDITS |

29456 Groesbeck Hwy | Roseville , MI 48066 | 586.771.5000

© 2009 - Wolverine Plating Corp. All Rights Reserved